BJTTG - M 1 GLOSS BLACK

  • MSDS: BJTTG
  • Manufacturer: PLASTI KOTE COMPANY INC
  • Product Name: M 1 GLOSS BLACK
  • National Stock Number: 8010-00F014179
Product Identification

Product ID:M 1 GLOSS BLACK
MSDS Date:11/06/1986
FSC:8010
NIIN:00F014179
MSDS Number: BJTTG

Responsible Party
PLASTI-KOTE COMPANY, INC
1000 LAKE RD
MEDINA, OH 44256

Emergency Phone: (216) 725-4511

Info Phone: (216) 725-4511

Cage: DO534

Contractor
TEMPO PRODUCTS CO A PLASTI-KOTE CO INC
MEDINA, OH 44256 US

Telephone: 330-725-4511

Cage: 07708

Ingredients

ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 23-35%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 5-10%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


VM&P NAPHTHA (LIGROINE)

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 5-10%

OSHA PEL 300 PPM/400 STEL

ACGIH TLV: 300 PPM; 9192


SOLVENT NAPHTHA, PETROLEUM, LIGHT AROMATIC C8-C10 (AROMATIC

CAS: 64742-95-6

Fraction By Weight: 5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM


LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA

CAS: 64742-89-8

Fraction By Weight: 6-16%

OSHA PEL 200 PPM

ACGIH TLV: 350 MG/CUM


PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: <30%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9192


ISOBUTANE, 2-METHYLPROPANE

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: <30%

OSHA PEL 1800 MG/CUM

ACGIH TLV: 1000 PPM


BUTANE

CAS: 106-97-8

RTECS: EJ4200000

Fraction By Weight: <30%

OSHA PEL 800 PPM

ACGIH TLV: 800 PPM; 9192


NON-HAZARDOUS FOR INGREDIENTS

Fraction By Weight: 8-17%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NASAL/RESPIRATORY
IRRITATION, DIZZINESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHES,
POSSIBLE UNCONSCIOUSNESS/EVEN ASPHYXIATION. EYE: SEVERE IRRITATION,
REDNESS, TEARING, BLURRED VISION, & WATER ING. INGESTION:
GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING, DIARRHEA. SKIN:
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: REPEATED/PROLONGED OVEREXPOSURE TO
SOLVENTS CAUSES PERMANENT BRAIN/NERVOUS SYSTEM DAMAGE. SEVERE
OVEREXPOSURE IN LABORATORY ANIMALS HAS ALSO CAUSED LIVER
ABNORMALITIES/DAMAGE TO KIDNEYS, L UNGS/SPLEEN. INTENTIONAL MISUSE
BY DELIBERATELY CONCENTRATING & INHALING THE CONTENTS MAY BE
HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:ALLERGIC RESPIRATORY &/OR SKIN
REACTION

First Aid

First Aid:INGESTION: REMOVE INDIVIDUAL TO FRESH AIR. IF BREATHING IS
DIFFICULT. ADMINISTER OXYGEN. IF BREATHING IS STOPPED. GIVE
ARTIFICIAL RESPIRATION. EYES: FLUSH W/WATER FOR 15 MINS. INGESTION:
DON'T INDUCE VOMITING. ASPIRATION OF INTO LUNGS CAN CAUSE CHEMICAL
PNEUMONITIS/FATAL. KEEP PERSON WARM & QUIET. SKIN: WASH W/SOAP &
WATER OR VARIOUS HAND CLEANERS. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Fire Fighting

Flash Point:0F
Lower Limits:1.0%
Extinguishing Media:"ALCOHOL" FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. IF WATER IS
USED, FOG NOZZLES ARE PREFERABLE. USE SCBA W/A FULL FACEPIECE,
OPERATED IN PRESSURE DEMAND OR OTHER PRESSURE MODE.
Unusual Fire/Explosion Hazard:WATER MAY BE USED TO COOL CLOSED
CONTAINERS TO PREVENT PRESSURE BUILD-UP/POSSIBLE AUTOIGNITION OR
EXPLOSION WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. VENTILATE
AREA. ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR ABSORBENT, OR
OTHER ABSORBENT MATERIAL & TRANSFER TO A CLOSED CONTAINER.

Handling

Handling and Storage Precautions:DON'T STORE >120F, IN DIRECT SUNLIGHT,
HEAT, OPEN FLAMES, PUNCTURE OR INCINERATE. AVOID BREATHING VAPORS
OR SPRAY MISTS.
Other Precautions:VAPORS ARE >AIR & MAY TRAVEL ALONG THE GROUND. STORE
LARGE QUANTITIES IN BUILDINGS PROTECTED FOR STORAGE OF NFPA CLASS
IC FLAMMABLE LIQUIDS.

Exposure Controls

Respiratory Protection:TO AVOID BREATHING VAPORS OR SPRAY MISTS, OPEN
WINDOWS & DOORS OR USE OTHER MEANS TO ENSURE FRESH AIR ENTRY DURING
APPLICATION/DRYING. WEAR RESPIRATORY PROTECTION (NIOSH/MSHA TC23C
OR EQUIVALENT), OR LEAVE THE AREA.
Ventilation:PROVIDE SUFFICIENT MECHANICAL/LOCAL EXHAUST VENTILATION TO
KEEP Protective Gloves:CHEMICAL RESISTANT, NEOPRENE
Eye Protection:CHEMICAL SPLASH GOGGLES
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM.
WASH CLOTHING BEFORE RE-USE.
Supplemental Safety and Health
WT/GAL: 7.0-8.0 LBS.

Chemical Properties

Boiling Pt:B.P. Text:133-331F
Melt/Freeze Pt:M.P/F.P Text:1500F
Vapor Density:>AIR
Spec Gravity:<1
Evaporation Rate & Reference:SLOWER THAN BU AC
Solubility in Water:MODERATE
Appearance and Odor:TYPICAL SOLVENT PAINT
Percent Volatiles by Volume:85-90%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:PILOT LIGHTS, FLAMES, SPARKS, HEATERS,
SMOKING, ELECTRIC MOTORS OR OTHER IGNITION SOURCES, SUNLIGHT. DON'T
STORE >120.
Hazardous Decomposition Products:TOXIC MATERIALS, CO, CO, VARIOUS
HYDROCARBONS, NITROGEN COMPOUNDS, ETC.

Disposal

Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAY BE
DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE
W/LOCAL, STATE, & FEDERAL REGULATIONS. FLAMMABLE LIQUIDS. CONSUMER
COMMODITY ORM-D PAINT.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.